Fluid Tech Logo Tagline
Fluid tech images
link
Products
spacer
spacer
  SEEPEX   -   Progressive Cavity Pumps & Macerators
seepex

Specifications

  • Capacity: up to 500 m³/hr
  • Pressure: up to 48 bar
  • Temperature: up to 180°C
  • Viscosities: up to  100,000 cSt

Features & Benefits
Conventional, 6L and Tricam geometry with long pitch, resulting in less wear.Open hopper and auger feed screws for solid mixed and non-flowable products.High metering accuracy (deviation ±1%)Macerator for chopping solid and fibrous components.Food grade pumps with 3A Sanitary Standards and EHEDG directives.

 
 
  SEEPEX   -   Group N Series
 

Specifications

  • Capacity: up to 500 m³/hr
  • Pressure: up to 48 bar
  • Temperature: up to 180°C
Features & Benefits
The two ranges of pumps within the product group N form the basis of all seepex rogressive cavity pumps. They areavailable with various rotor/stator geometries (conventional, 6L, and Tricam) and can be applied in virtually all industrial sectors – for conveying thin to viscous media with or without solids.
 
  SEEPEX   -   Group CS Series

Specifications

  • Capacity: up to 130 m³/hr
  • Pressure: up to 24 bar
  • Temperature: up to 180°C

Features & Benefits
The 3 product ranges of the CS product group are used primarily in the food, pharmaceutical, cosmetics and chemical industries. “C” stands for CIP (Cleaning in Place) and “S” for SIP-capability (Sterilisation In Place) of the pumps. CS pumps satisfy the highest requirements with regard to gentle conveying, sanitation, cleaning and sterilisation. They comply withthe 3-A Sanitary Standards of the USA and with EHEDG directives.

 
  SEEPEX   - Group T Series

Specifications

  • Capacity: up to 130 m³/hr
  • Pressure: up to 24 bar
  • Temperature: up to 180°C

Features & Benefits
There are 9 ranges of open hopper pumps. They are used for viscous media that have only little or no flowability. T pumps have a feed hopper and an auger feed screw to positively feed the product into the pumping elements.

 
  SEEPEX   - Group D Series

Specifications

  • Capacity: up to 500 m³/hr
  • Pressure: up to 48 bar
  • Temperature: up to 180°C
Features & Benefits
The 6 ranges of dosing pumps can be used in virtually all industries for the metering and dosing of precise quantities.They are particularly good for low-pulsation conveying of low to high viscosity fluids, as well as media containing solids and those that are chemically aggressive.
 
  SEEPEX   -  Group E Series

Specifications

  • Capacity: up to 300 m³/hr 
  • Pressure: up to 12 bar
  • Temperature: up to 180°C
Features & Benefits
Semi-submersible pumps are installed vertically. They pump liquids of different viscosities, which may be abrasive or even corrosive. Due to their high efficiencies, a minimal footprint and their maintenance-friendly design, seepex semi-submersible pumps have low life-cycle costs and are a viable alternative
to other pump systems.
 
  SEEPEX   -  Group W Series

Specifications

  • Capacity: up to 10 m³/hr 
  • Pressure: up to 4 bar
  • Temperature: up to 180°C

Features & Benefits
Wobble pumps in block design perform well in almost all industries. They convey liquids of all viscosities, even those with high solids, are very simple to use and particularly efficient.

 
  SEEPEX   -  Group M Macerators

Specifications

  • Capacity: up to 150 m³/hr

Features & Benefits
While the 2 ranges of seepex macerators are primarily used for municipal and industrial wastewater, they are also used
for diverse applications in other industries. They chop the solid and fibrous components and increase the operating time and service life of the downstream equipment. The degree

of maceration can be controlled by varying the flow rate, the drive speed and the shear plate design.
 
  SEEPEX   -  Group CO

Specifications

  • Custom Design

Features & Benefits
We tailor our control systems (CO = Control) to optimise the pump and the process. Standardised modules are available for dosing applications and the pumps protection, e.g. overpressure
or dry-running. In addition, we provide individualised control solutions by consulting with our customers which can

include component supply or complete panel design.
 
 
Spacer
bt_lft Powered by accel   Copt rights bt_rt
Spacer